Do you ever wonder how you can clean your office window while thinking of the impossibility of having a professional result at the end of the cleaning? This article will guide you and your friends will think it is professional work. Additionally, to some people, especially if you are not professional, cleaning your office windows might be a daunting task, however, in this article, I will be sharing how you can clean-wash your window like a professional. While this involves some DIY techniques, you may prefer getting your window clean without lifting a finger. If that’s so, contact System4 DFW commercial window cleaning. Onward!
1. Get ready your washing tools and supplies
You are going to need several things to begin your window cleaning with. You will need a sponge or brush, a dry towel for drying, a squeegee, a bucket of water, a large towel to protect the floor inside, and a cleaning agent to make a cleaning solution.
2. Make your cleaning solution.
While there are different types of cleaning solutions out there, it is mostly recommended that you use a simple water and detergent solution.
To make your windows clean and free of germs, mix your cleaning solution by following the instructions below.
Mix two gallons of water with a teaspoonful of dishwashing liquid.
Mix in equal quantities of water and white vinegar.
Mix in one-quarter cup of isopropyl and a quarter of vinegar with one tablespoon of cornstarch.
3. Clean the windows.
Dip your sponge into the cleaning solution, squeeze out excess water from it, and begin wiping down the surface of the entire windows. If your windows are not too high, you can be ok with a sponge in your hand. However, for windows where your hands can reach the top corners, use a squeegee, or attach an extension pole and make sure that all corners of the window surface are wiped.
Make sure you rinse a washed window and dry it before you move on to the next window.
4. Wipe the windows dry.
To properly wipe the surface of your windows, there are tricks you can use in the process. Use a squeegee with a rubber blade on it to wipe small-paned windows. Wipe the water off the window in a vertical manner, starting from top to bottom. In your cleaning picture windows, clean horizontally with strokes, starting at the top till the bottom sides. Try to overlap each stroke with a couple of inches and dry-clean using a lint-free cloth.
5. Clean the inside of the windows and wipe up excess water.
After cleaning the outside part of the window, the next is to clean the inside part. As you go about cleaning your windows from the outside, there should be water spills and drops of cleaning agents around the inside surface of the windows. Now it’s time to visit your inside windows and get them clean.
To do this, notice anywhere around your inside windows where water has spilled on or run down, then dry-clean the areas with something that can absorb such as linth-free cloth. This will help you avoid Stark’s on your window.
You also need to be careful not to cause damage to the frame, so use a separate rag to clean the water dry from your window.
Odyssey has been the lead content writer and content marketer. He has vast experience in the field of writing. His SEO strategies help businesses to gain maximum traffic and success.